Xtire Sealant AUTO instantly seals punctures in tubeless tires. Its unique packaging provides an easy, quick and clean application. Don’t lose time trying to dose the amount of sealant to apply to the tire. Xtire Sealant AUTO is different – just choose the right kit for your car and apply one bottle in each tire. Simple as that!
• Tubeless tires only
• Instantly seals punctures in the tread area made by objects
up to 1/4" (6 mm) in diameter
• Non-toxic, non-hazardous and non-flammable
• Non-corrosive (safe for tires, rims and wheels)
• Environmentally friendly and rinses off with water
• Valve core removal tool comes with the kit
• Requires air
1. Lift the vehicle with a jack to protect the tire (when it is totally
deflated the weight of the car can damage it);
2. Remove the valve core with the valve tool and allow the tire
to fully deflate;
3. Shake the pouch for a few seconds and then attach the hose
on the bottle;
4. Attach the hose on the valve stem;
5. Slowly squeeze the pouch to inject the entire content into the tire;
6. Clean up the valve stem to eliminate sealant residues with
compressed air;
7. Reinstall the valve core and inflate the tire;
8. Repeat procedure above for other tires.
• Kit composed of 4 pre-dosed bottles ready to use
• 1 gallon drum
• 5 gallon drum
• Capacity to transfer 8.5 oz (250 ml) of sealant in each cycle.
• Does not seal punctures outside of the tread area;
• Operates at minimum 20 PSI tire pressure;
• Not recommended on non-sealed TPMS sensors.