Xtire Sealant MOTO instantly seals punctures in tube and tubeless tires. Its unique packaging provides an easy, quick and clean application. Don’t lose time trying to dose the amount of sealant to apply to the tire. Xtire Sealant MOTO is different – always use one pouch in each tire. Simple as that!
• Tubeless tire: instantly seals punctures in the tread area made
by objects up to 1/4" (6 mm) in diameter
• Tire with tubes: instantly seals punctures in the tread area made
by objects up to 1/8" (3 mm) in diameter
• Non-toxic, non-hazardous and non-flammable
• Non-corrosive (safe for tires, rims and wheels)
• Environmentally friendly and rinses off with water
• Valve core removal tool comes with the pouch
• Requires air
1. Remove the valve core with the valve tool and allow the tire
to fully deflate;
2. Shake the pouch for a few seconds and then attach the hose
on the bottle;
3. Attach the hose on the valve stem;
4. Slowly squeeze the pouch to inject the entire content into
the tire (always use one pouch per tire);
5. Clean up the valve stem to eliminate sealant residues with
compressed air;
6. Reinstall the valve core and inflate the tire.
• Does not seal punctures outside of the tread area;
• Operates at minimum 20 PSI tire pressure;
• Not recommended on non-sealed TPMS sensors.
